Knockdown Texture Sponge Unboxing and Demonstration Video—> Check it Out below!!
Have questions about the Knockdown Texture Sponge technique that you see in the video?
Please feel free to ask Your Questions in the Comment Section of my video on YOUTUBE
Hey everyone! I just wanted to do a quick unboxing of the knockdown texture sponge by: The Texture Master and I am also doing a texture matching demonstration of me using the knockdown texture sponge to match the knockdown texture on a 4″x 8″ spot on a ceiling where water had damaged the ceiling from a very small roof leak on a drywall repair job that I did recently. This Texture matching drywall tool is a great little addition to any painters, handyman, handygirl, maintenance crew, DIY’ers, and even contractors drywall repair punchout list.
Thanks for watching!!!
The Texture Master’s Knockdown Texture Sponge $17.99 + $4.99 shipping & handling :
or Save $$$ with the Contractor Double Pack!
The Texture Master’s Knockdown Texture SpongeContractor Double Pack$25.99 + $4.99 shipping & handling :
Knockdown Texture Sponge Unboxing and Quick Knockdown Texture Matching Demonstration
I recommend not using a clumsy and messy texture spray can that the texture comes out to thin and never really matches a normal knockdown texture. Another method that is difficult to match knockdown texture is using a compressor and texture hopper for these types of small drywall and texture repairs. A hopper simply is hard to dial in and get the right size splatters when trying to match knockdown texture. Texture hoppers also put out too much texture on not only the repair but the surrounding area when the texture is better if it’s concentrated to a smaller area around the repair area. Resulting in too much knockdown texture build up. Never really making the patch invisible. Along with the knockdown texture sponge this texturing project will require a couple more hand tools to do be able to blend the knockdown texture.
Knockdown texture repair tools you will need:
- 1) Knockdown Texture Sponge
- 2) All purpose joint compound (I use USG green lid AP)
- 3) Drywall Mud pan
- 4) 6″ and 12″ Taping knife or knockdown trowel
I’ve found in my over 20 years in business as a drywall contractor and painting contractor, that using my texturing technique along with my knockdown texture sponge. I could match or at least get really similar knockdown texture on the smaller wall and ceiling knockdown texture patch areas. After drywall repairs were primed and painted you couldn’t even see the repaired wall or ceiling areas.
Now you can match knockdown texture like a Pro!
Perfect diy way to patch a small area of knockdown texture