X

Knockdown Texture (What is it?)

Medium

“Knockdown texture is very visually pleasing and adds interest and a unique Mediterranean feel to any wall or ceiling.

Knockdown texture also know as Splatter texture is a very popular texture in many areas of the United States and around the world. Here in my area all of the general contractors that are building homes in new construction are pretty much using knockdown texture exclusively in the large new neighborhoods that are being built and have been doing so since the early 1990’s. That makes for a lot of homes that have knockdown texture on ,ceilings, walls or both.

“There are millions of homes that have knockdown texture here in the United States!


Spraying knockdown texture using a Graco RTX 1500 texture machine


Knockdown texture is applied by spraying thinned down premixed joint compound or a special ceiling and wall texture product that comes in a powder form and has to be mixed with water to get the proper consistency depending what size and thickness knockdown texture you’re trying to match or achieve.

Large electric texture machine- Graco RTX 1500 Texture Machine


To spray a knockdown texture on new construction or large remodel projects professional texture contractors and drywall contractors use large truck mounted texture rigs or a smaller electric commercial texture machine on smaller texturing projects or with a hopper and air compressor or by using a commercial texture machine for larger projects and contractors. It is also one of the most popular texture finishes in new construction, remodels and has been going in homes here in Brevard County since the early 1990’s.

DIY Knockdown texture for the Do it Yourselfer’s:

“One of the most popular questions I get asked is “How do I match knockdown texture“?


Checkout my Featured Knockdown Texture Video Playlist!

Click Here (10 Videos)–> youtube/playlist/knockdown-texture


If you’re a Do it Yourselfer that want’s to apply a knockdown texture on a ceiling repair, drywall repair, a wall that you removed wallpaper from or even just want to texture a room or two.. Then a hopper gun and compressor will probably do just fine for spraying a knockdown texture.

Texture machine


But, if you are going to do any more than a room or two I would recommend renting a larger texture machine from one of the big box stores or local tool rental store in your area for for around $45 a day or so.



Knockdown Sponge


Or if you only need to match the knockdown texture on a small drywall repair or ceiling repair, I would recommend using my knockdown texture sponge that can match any of the variations of knockdown.


New Video—> Check it Out below!!

“With just a little technique instruction from the Texture Master, You can Do It!



Here’s a just few photos of my many variations of knockdown texture”
Knockdown texture on Walls:

Knockdown texture on Ceilings:

Heavymore

New Home- Drywall Finishing and Knockdown Splatter Texture:


How will my knockdown texture look?

There are several factors that determine how your knockdown texture will look after it’s applied and knocked down. One of these factors is the surface of the area that is going to be sprayed with the knockdown. Which means that the new drywall will adsorb and start drying process from underneath before it’s knocked down. Now a painted surface is just the opposite because the surface is sealed and will not absorb like the new drywall does.

Another thing that determines your knockdown is the size splatters you will be trying to achieve. This is determined by the consistency of your knockdown texture mix. If your knockdown is mixed to soupy it will just flatten out when you go to knock it down.

The type of texture machine, compressor and hopper that you use to apply the knockdown texture can also be a factor in how your knockdown texture will look after it’s applied.

Those are just a few of the factors that determine how your knockdown texture will knock down and look once the new knockdown texture on your ceilings or walls has been painted.

“Knockdown texture can be applied in a light, medium or even a heavy consistency, depending on the look you’re going for…

If I’m applying a knockdown texture on both the ceilings and walls of a room or a whole house. I recommend there to be a variation of the size of splatters between the two surfaces knockdown of the ceiling texture and wall texture.

Ceiling= Half dollar to quarter size splatters
Walls= Nickel to dime size splatters

How to match Knockdown Texture

For wall or ceiling repairs, I have perfected the art of matching any knockdown texture with my knockdown texture sponge.

“Look no further…
This is where to buy your Knockdown Texture Sponge!

Great for DIY drywall texturing

Now you can match knockdown texture like a Pro!




The Texture Master’s Knockdown Texture Sponge $17.99 + $4.99 shipping & handling :




Match knockdown texdture on ceiling repairs: Knockdown texture repair tool can match heavy,medium and light splatter

Perfect diy way to patch a small area of knockdown texture


Click below if you would like to grow your Youtube Channel like I have for FREE!!!